Chlorate and Chloropicrin in Your Water

When people think about water contamination, they usually picture agricultural runoff or industrial pipes emptying into a river upstream. Chlorate and chloropicrin tell a different story: both are chemicals that largely enter tap water through the water disinfection process itself. One is born inside the utility’s bleach storage tank, while the other is a former World War I chemical weapon that now forms quietly inside treated water pipes—and still works farm fields as a soil fumigant. Despite their distinct origins and behaviors in water, neither chemical carries an enforceable federal drinking-water limit in the United States.

Understanding how each chemical forms, why their regulatory numbers look the way they do, and why they require completely opposite household filtration technologies makes all the difference when interpreting water quality data.

Chlorate: Born in the Bleach Tank

Chlorate is a negatively charged inorganic ion (ClO3-). In commercial industry, as sodium or potassium chlorate, it is used in pulp and paper bleaching, herbicides and defoliants, pyrotechnics, and matches. On the agricultural side, the U.S. Environmental Protection Agency’s (EPA) 2006 pesticide decision kept sodium chlorate’s food-crop uses—such as on cotton—with added protections, while terminating its residential uses.

In public drinking water, however, chlorate rarely comes from farm fields. Instead, it forms mainly when liquid hypochlorite bleach solutions age or are stored poorly, as well as during chlorine dioxide disinfection. Warm storage temperatures and sunlight break liquid bleach down into chlorate (alongside perchlorate). Because of this chemistry, bleach age and storage temperature are real, day-to-day operational controls for a water utility trying to keep chlorate levels down.

On the regulatory front, chlorate has no federal Maximum Contaminant Level (MCL) and no EPA health advisory. Rather than an enforceable limit, federal and state agencies use non-binding benchmarks that reveal a fascinating lesson in how regulators calculate safe exposure:

  • EPA Health Reference Level: 210 micrograms per liter (0.21 mg/L), derived from an oral reference dose of 0.03 mg/kg/day. (This is a reference level used for regulatory screening, not an advisory or a legal standard.)
  • EPA Watchlists: Chlorate was monitored nationwide under the third Unregulated Contaminant Monitoring Rule (UCMR 3) and sits on the EPA’s Contaminant Candidate Lists 3, 4, and 5.
  • World Health Organization (WHO): Sets a provisional guideline value of 0.7 mg/L.
  • California Benchmarks: Maintains a Notification Level of 0.8 mg/L (800 ppb) and a Response Level of 8 mg/L.
  • New Jersey and Proposition 65: New Jersey sets no drinking-water standard for chlorate, and it is not listed on California’s Proposition 65.

Look closely at the California and EPA numbers: California’s Notification Level (0.8 mg/L) actually sits above the EPA’s Health Reference Level (0.21 mg/L), even though both agencies started from the exact same oral reference dose of 0.03 mg/kg/day. Why? Because California assumed drinking water contributes a much larger share of a person’s total daily exposure—applying a relative source contribution of 0.8, whereas the EPA assumed drinking water accounts for only 0.2 (20 percent) of total exposure. Same underlying science, different exposure assumption, different resulting number.

Toxicologically, chlorate’s primary target is the thyroid gland: it blocks the thyroid’s uptake of iodide, lowering thyroid hormone levels (with thyroid cell changes documented in animal studies). At high doses above the reference dose, chlorate can also damage red blood cells, leading to hemolysis and methemoglobinemia. Regarding cancer, the EPA’s pesticide office concluded in 2006 that chlorate is “not likely to be carcinogenic to humans at doses that do not alter thyroid hormone homeostasis.” The EPA’s Integrated Risk Information System (IRIS) program has never assessed chlorate, and the International Agency for Research on Cancer (IARC) has no classification for it.

Chloropicrin: From Tear Gas to Disinfection Byproduct

Chloropicrin—chemically known as trichloronitromethane—is a colorless, oily liquid with an intensely irritating tear-gas odor. During World War I, it was stockpiled as a chemical-warfare tear gas under the code name “PS.” Today, it remains in active commercial use as a pre-plant soil fumigant—classified as a Restricted Use Pesticide with strict buffer zones under EPA decisions from 2008 (amended in 2009)—and as a warning agent added to other odorless fumigants so workers can detect leaks immediately.

In drinking water, chloropicrin forms as a nitrogenous disinfection byproduct (specifically, a halonitromethane) when chlorine or chloramines react with naturally occurring organic matter and nitrogen compounds in the water. Water chemistry researchers count chloropicrin among the more cytotoxic nitrogenous byproducts, particularly in treatment plants where pre-ozonation is followed by chloramination.

Its regulatory profile is defined by an absence of formal drinking-water standards:

  • Federal Status: Chloropicrin has no federal MCL and no EPA health advisory.
  • World Health Organization: The WHO has no guideline value for chloropicrin, concluding that the available toxicological data were inadequate to establish one, while noting that drinking-water concentrations are usually below 5 micrograms per liter.
  • State and Proposition 65 Status: Neither California nor New Jersey sets a drinking-water standard for chloropicrin (California regulates it strictly as a restricted agricultural pesticide rather than through tap-water rules), and it is not listed on Proposition 65.

In health evaluations, chloropicrin causes severe irritation and damage to the respiratory tract, eyes, and gastrointestinal lining, while chronic oral animal studies show reduced body weight and survival. On carcinogenicity, the EPA’s pesticide office classifies chloropicrin as “Not Likely To Be Carcinogenic to Humans.” Neither the EPA’s IRIS program nor IARC has ever evaluated it.

ChemicalFederal MCL / Health AdvisoryKey BenchmarksPrimary Health EffectsCancer Classification
ChlorateNone / None (on CCL 3, 4, 5; monitored in UCMR 3)EPA Health Reference Level: 210 µg/L (0.21 mg/L); WHO: 0.7 mg/L; CA Notification: 0.8 mg/LBlocks thyroid iodide uptake; red blood cell damage (hemolysis, methemoglobinemia) at high dosesEPA Pesticide Office: Not likely at doses not altering thyroid homeostasis; no IRIS or IARC
ChloropicrinNone / NoneWHO: No guideline value set; CA & NJ: No water standardSevere respiratory, eye, and GI tract irritation; reduced body weight and survival in chronic animal studiesEPA Pesticide Office: Not Likely To Be Carcinogenic to Humans; no IRIS or IARC

What Removes Them: A Split Verdict

Because chlorate and chloropicrin sit in completely different chemical categories—one an inorganic salt ion, the other a reactive organic molecule—no single home water filter removes both. Effective removal requires matching the treatment technology to the specific chemical:

  • For Chlorate: Because chlorate is a dissolved inorganic ion, reverse osmosis (RO) and anion-exchange (ion exchange) systems remove it effectively. By contrast, granular activated carbon and air stripping do not remove chlorate.
  • For Chloropicrin: Chloropicrin flips the script entirely. Granular activated carbon (GAC) removes chloropicrin through both physical adsorption and chemical reduction directly on the carbon surface. Meanwhile, air stripping and reverse osmosis are not established for chloropicrin in EPA sources.

What It Means for the Reader

Chlorate and chloropicrin remind us that clean tap water is a balancing act. Utilities must disinfect water to prevent waterborne disease, yet the very disinfectants that keep pathogens out of your pipes can generate chemical byproducts depending on how bleach is stored or how ozone and chloramines interact with organic matter.

Because neither chemical carries a federal MCL, you will not see them listed alongside regulated contaminants unless your utility conducts special unregulated monitoring or falls under state notification rules like California’s. More importantly, if you ever want to reduce either compound at your kitchen sink, knowing which one you are targeting is critical: an ion-exchange or reverse osmosis system handles dissolved chlorate ions, whereas an activated carbon filter is the proven tool for chloropicrin.

Facts first, then filter. — Steve

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *